网上棋牌游戏

首页 > 五金工具 > 唐山乐亭大型钢板仓上涨行情即将来临 Position: Home > Hardware Tools > Tangshan Leting large steel warehouse rises soon

Tangshan Leting large steel warehouse rises soon

发布时间: 2019-12-29 17:36:01 发布人: 王经理 字体大小: 【大】 【中】 【小】 Article source: hplcccsbgs Release time: 2019-12-29 17:36:01 Posted by: Manager Wang Font size: [Big] [Medium] [Small]

<p> The rising market of Tangshan Leting's large steel warehouse is coming. Steel warehouse 1: A technical barrier that can solve the cement compaction caused by temperature difference and gas in the steel warehouse wall, and the physical indicators will decline. The effective range of this design is within the temperature range of minus 50 ° C to 160 ° C of the ambient temperature of the steel plate warehouse. The physical indexes of the cement in the steel plate warehouse are unchanged. Welcome to call Tangshan Leting with good sealing and wide application. The steel silo adopts special equipment for winding silos, which guarantees the quality and tightness of any part of the silo by bending and engaging. Can store cement, fly ash, ultra-fine slag powder and other powdery materials. Widely used in the building materials industry. Such as cement plants, power plants, grinding stations, etc. Note for the project: In order for the large-scale steel warehouse to run normally and the discharge of materials will not affect the performance of the steel warehouse, it must be operated correctly according to the instructions. If it is not used according to the instructions, it will not produce ideal results. Each enterprise specifically operates a large steel warehouse based on the situation, which is a building or group of buildings made of steel. Compared with traditional warehouses, large steel warehouses have the following characteristics. Large steel warehouses include steel warehouses, steel warehouses, spiral coil warehouses, and welded steel warehouses. They have the following characteristics compared to reinforced concrete storage. Installation material Hainan welcomes calls to solve the problem: check the plugging point of the pipeline, open the blowing aid for dredging, and tap the plugging point of the pipeline until the pipeline is clear. Tangshan Leting's large steel warehouse rises soon, with short construction period and low cost. Spiral bite steel warehouse construction on site, installation on the roof of the warehouse. The forming and bending line speeds of the Philips construction equipment can reach 5 meters per minute. Scaffolding and other auxiliary facilities are not required, so the construction period is extremely short. Spiral bite steel bins are made of thin steel plates, and their weight is only equivalent to the weight of the reinforced concrete bins of the same capacity, which greatly reduces the cost. In addition, because it can bend and form two different materials outside the cylinder by the double-layer bending method, Tangshan Leting's large steel plate warehouse can greatly reduce the storage of corrosive materials in the chemical and environmental protection industries. project costs. Online consulting integrity service </ p> <p>

Tangshan Leting large steel warehouse rises soon


</ p> <p> Tangshan Leting's large steel warehouse rises. The foundation soil is uneven, partly, partly. Save land occupation: In the existing layout, the layout of the process does not seem to be prominent, but the widening of the large warehouse spacing has created conditions for considering the expansion of off-season reserves. The continuous good storage factor in the off-season should be a major factor that cannot be ignored. The layout of the stereotyped design is the same temperature design, and different weather conditions are the same model. In order to avoid the predicament that the rainy season is not continuous, reduce the investment of finished trouser bag storage and increase the volume of bulk storage. Not only does it avoid production shutdown in the off-season due to insufficient reserves, it also solves the cost loss of repeated operations of bag storage, and the existing layout of the room between the warehouses highlights the effect of energy saving. Tangshan Leting's affordable self-leveling effect of large warehouses: Large-scale warehouses have large section areas. After the feeding material forms an angle of repose, the uniform distribution area of the stored material is larger. The diffusion area of the same amount of instantaneous feed is twice that of a small round traditional round silo. The layered stacking materials can be fully mixed at different instants in the setting of the gasification depth, and the heart discharge is being mixed. The defects of natural homogenization and quality fluctuation have been formed. This effect saves the power consumption of air mixing and emptying of the warehouse and the waste of equipment operation and equipment maintenance, creating conditions for enterprises to reduce good costs. Due to the limitation of the round area, the fabrics in traditional round warehouses are thicker. Take, for example, a 15-meter diameter round silo. The area of the warehouse is about 176 square meters. If it is still fed at 60 cubic meters per hour, the thickness of the material layer is 0.34 meters. A large steel warehouse with a capacity of 30,000 tons has a diameter of 30 meters and an area of 75.7 square meters. If the material is still fed at 60 cubic meters per hour, the thickness of the material layer is only 0.08 meters. In addition, the central feed deposition density increased rapidly to form vertebral bodies. The increase in the center of the vertebral body naturally formed a flowing slope with a apex angle of about 45 degrees. This gradient greatly increases the feed diffusion area, and the distribution thickness of the material layer is greatly reduced in an instant. If the gasification thickness is set to 0.9 meters, the self-homogenization function can make the feed volume of nearly 100 hours, and in the fully-mixed homogenization, the mass flow of materials entering the warehouse will be eliminated. This function completely avoids the loss of power consumption of traditional round silos with conveying, aeration and mixing. During the loading and normal use of the steel warehouse, if there is any abnormal situation, the charging should be stopped, and the settlement records should be made, and emergency measures should be taken to deal with it promptly and properly and notify the relevant units. Steel silos are roughly divided into bolt assembly steel silos, spiral steel silos, and welded steel silos. Quality management The rising price of large steel silos in Yingkou Tangshan Leting is coming soon. Steel bolt silos, especially mechanical punching steel, high strength bolts are connected to the steel silo assembly. Its structure determines its limitations. Only suitable for small warehouses of 2000-3000 tons. This is because the connecting rod is worn, the air permeability is poor, and the sealing performance is poor. It is not suitable for powder materials to store perishable items such as cement and fly ash. Inspection requirements steel plate silo "combined" grain storage technology application steel silo wall thin, heat absorption fast, Tangshan Leting roll plate silo, heat dissipation is fast, if there is a temperature detection device in the silo, once the temperature changes, you can find in time, Tangshan Letting steel silo be properly processed. "Combined" grain storage technology, plus some existing grain processing technologies, such as cleaning, screening, grading, suction and dust removal, and mature and complete management methods, such as dumping warehouses, automatic cooling systems in warehouses, etc. Steel silos will also be able to achieve safe grain storage. Homepage Recommendation </ p> <p>

Tangshan Leting large steel warehouse rises soon


</ p> <p> The rise of Tangshan Leting's large steel warehouse is coming. This section passes through a large welding steel warehouse, also known as a steel warehouse. Mainly welded with steel. With the continuous development of the steel silo industry, large-scale welded steel silos developed and constructed by our country have emerged as the times require. The materials for brilliant steel plates with excellent quality, especially for large steel plates, are always unloaded directly from the middle of the bottom of the inverted cone. The material at the edges always accumulates and causes the dead material zone, which greatly reduces the rate of the warehouse. At present, there are serious unloading problems in steel plate warehouses constructed by conventional technologies. After completion, the rate of unloading is OK. However, the unloading will become worse and worse with time. For example, when Zhoukou Tianrui's warehouse (30,000 tons. 31m in diameter) is serious, only the remaining middle diameter of 4m is unloaded smoothly. The remaining parts are all deposited as dead zone. And the dead zone is constantly growing. Blocked and unloaded. When clearing the warehouse, it was found that the accumulation repose angle of the cement in the area reached 70 degrees to 90 degrees, and the fluidity was completely lost. Folding first generation large-scale steel plate warehouse represents the company and its technical characteristics. The first generation large-scale steel plate warehouse is also called "sinking fully-discharged steel plate warehouse." Because of the use of "subsidence decompression and anti-seismic building foundation structure (Patent No. 20092035123", multifunctional cone) Large-scale storage (patent No. 20092027936 and other 23 patented technologies, especially the complete discharge system of powder storage, structures that increase the bearing capacity of the building under arbitrary geological conditions, and high-latitude metal storage walls to reduce fatigue The use of key technologies such as the warehouse has increased the discharge ratio of the powder storage, increased the basic bearing capacity of the large steel plate building, and extended the service life of the large steel plate warehouse in high latitudes to the theoretical design life. The diameter (m) is focused on the development. The above are some small details summarized. Be careful in the steel warehouse. After years of development, from small to large, occupying the market with strict quality and constant scale. Welcome everyone to contact us for questions. Silo body tilt: using rigid foundation and rigid foundation to ensure uniform stacking of incoming materials and single-point discharge. Multi-point discharge materials Advantages, but due to human error or the failure of some blanking openings, it is easy to cause the material to deflect. Large-scale to prevent partial load of the material, but due to statistical data such as error accumulation, and human error operation, the possibility of partial load is actually Very high, its main advantage is that because the feed hole does not occur at the same time, it causes a large amount of material in the warehouse, which is helpful to reduce the workload and difficulty of the Qing Dynasty library. In addition, the multi-point discharge rate is high. When When the cost of soil or foundation treatment is relatively large, foundations that allow settlement can be used, but in areas with high soil bearing capacity, rigid, non-sedimentary foundations should be used. This paragraph of patent group was developed and planned by the world's developer cities (referred to as " World Urban Construction ") initiative, an open industrial standardization patented technology group for the operation and management of the World Urban Construction Central Laboratory. </ P>